usage
- clean flange surfaces before application.
- apply sealant continuously around bolt holes.
- apply sufficient torque to prevent flange displacement.
- do not use anaerobic gasket sealant as filler.
- enhance traditional gaskets by overlaying with anaerobic gasket sealant.
perfect seals every time: mxbon® gasketing sealant series
characteristics
-
14510
anaerobic, heat resistance
resistant to high temperatures up to 204°c, excellent solvent and chemical resistance.
applicable to rigid castings, milling surfaces, with a maximum fill gap of 0.25mm.
will not tear or age.
volume：50ml / 250ml -
14515
anaerobic, gap-filling, general-purpose
rapid curing, high viscosity and suitable for large gap filling.
excellent solvent and chemical resistance, non-corrosive.
applicable to rigid castings, stamped metal parts, with a maximum fill gap of 0.25mm.
will not tear or age.
volume：50ml / 300ml -
14518
anaerobic, gap-filling, surface insensitive
high viscosity and suitable for large gap filling.
excellent solvent and chemical resistance, non-corrosive.
suitable for aluminium alloy materials, rigid castings, and stamped metal parts.
will not tear or age.
volume：50ml / 300ml -
14574
anaerobic, rapid curing
quick curing, immediate sealing at low pressure.
excellent solvent resistance and chemical resistance.
applicable to rigid castings, stamped metal parts.
will not tear or age.
volume：50ml / 250ml
technical information
| item no. | appearance |
viscosity mpa.s |
gap performance(mm) |
working temp. ℃ |
cure speed | nsf | ||
|---|---|---|---|---|---|---|---|---|
| without activator | with activator | without activator | with activator | |||||
| 14510 | pink | 40,000-140,000 thixotropic |
0.25 | 0.50 | -54℃-204℃ | 4-24hrs | 30min-4hrs | |
| 14515 | purple | 150,000-375,000 thixotropic |
0.25 | 1.25 | -54℃-150℃ | 1-12hrs | 15min-2hrs | |
| 14518 | red | 500,000-1,000,000 thixotropic |
0.25 | 1.25 | -54℃-150℃ | 4-24hrs | 30min-4hrs | |
| 14574 | orange | 70,000-120,000 thixotropic |
0.25 | 0.50 | -54℃-150℃ | 1-12hrs | 15min-2hrs | |
contact us contact us